• FRAMES ADHERE TO EIA 310 STANDARDS
• STATIC LOADS STARTING AT 2000 LBS
• EASILY CONFIGURABLE
• OPEN OR INTEGRAL SIDE PANEL OPTIONS
• SINGLE AND MULTI-BAY CONFIGURATIONS AVAILABLE

• FULLY WELDED STEEL COSNTRUCTION
• BAY CONFORMS TO EIA 310-E STANDARD DIMENSIONS
• ACCEPTS ALL 3RD PARTY EIA 310-E EQUIPMENT & H&H ACCESSORIES
• VARIETY OF HEIGHTS & DEPTHS AVAILABLE
• GANGABLE TO CREATE MULTI-BAY CONFIGURATIONS
• SHOWN WITH RECESSED CASTER BASE – ACCEPTS OTHER BASE OPTIONS
• OPEN OR SOLID SIDE OPTIONS
• STARTING AT 2000 LB STATIC LOAD CAPACITY

• FULLY WELDED STEEL CONSTRUCTION
• SINGLE WELDMENT DIVIDED INTO TWO 19” WIDE BAYS
• EACH BAY CONFORMS TO EIA 310-E STANDARD DIMENSIONS
• ACCEPTS ALL 3RD PARTY EIA 310-E EQUIPMENT & H&H ACCESSORIES
• VARIETY OF HEIGHTS & DEPTHS AVAILABLE
• SHOWN WITH EXTENDED FRONT CASTER BASE
• INTEGRATED FORK TUBES OPTIONAL
• OPEN & SOLID SIDES OPTIONS

• ALSO AVAILABLE IN FOUR BAY CONFIGURATIONS
• EACH BAY CONFORMS TO EIA 310-E STANDARD DIMENSIONS
• ACCEPTS ALL 3RD PARTY EIA 310-E EQUIPMENT & H&H ACCESSORIES
• VARIETY OF HEIGHTS & DEPTHS AVAILABLE
• SHOWN ON EXTENDED FRONT RECESSED CASTER BASE
• INTEGRATED FORK TUBES OPTIONAL
• OPEN & SOLID SIDE OPTIONS

• FULLY WELDED STEEL CONSTRUCTION
• BAYS INDIVIDUALLY CONFIGURABLE
• INTERFACE BETWEEN BAYS OPEN TO ALLOW FOR CROSS CONNECTIVITY
• SHOWN ON EXTENDED FRONT BASE
• INTEGRATED FORK TUBES OPTIONAL
• VARIETY OF WORK SURFACES STYLES AVAILABLE

• FULLY WELDED STEEL CONSTRUCTION
• BAY CONFORMS TO EIA 310-E STANDARD DIMENSIONS
• ACCEPTS ALL 3RD PARTY EIA 310-E EQUIPMENT & H&H ACCESSORIES
• VARIETY OF DESK OPTIONS
• VARIOUS CONFIGURATIONS AVAILABLE
• GANGABLE TO FORM MULTI-BAY CONSOLES

• FRAMES ADHERE TO EIA 310 STANDARDS
• STATIC LOADS STARTING AT 2000 LBS
• EASILY CONFIGURABLE
• OPEN OR INTEGRAL SIDE PANEL OPTIONS
• SINGLE AND MULTI-BAY CONFIGURATIONS AVAILABLE

• FULLY WELDED STEEL COSNTRUCTION
• BAY CONFORMS TO EIA 310-E STANDARD DIMENSIONS
• ACCEPTS ALL 3RD PARTY EIA 310-E EQUIPMENT & H&H ACCESSORIES
• VARIETY OF HEIGHTS & DEPTHS AVAILABLE
• GANGABLE TO CREATE MULTI-BAY CONFIGURATIONS
• SHOWN WITH RECESSED CASTER BASE – ACCEPTS OTHER BASE OPTIONS
• OPEN OR SOLID SIDE OPTIONS
• STARTING AT 2000 LB STATIC LOAD CAPACITY

• FULLY WELDED STEEL CONSTRUCTION
• SINGLE WELDMENT DIVIDED INTO TWO 19” WIDE BAYS
• EACH BAY CONFORMS TO EIA 310-E STANDARD DIMENSIONS
• ACCEPTS ALL 3RD PARTY EIA 310-E EQUIPMENT & H&H ACCESSORIES
• VARIETY OF HEIGHTS & DEPTHS AVAILABLE
• SHOWN WITH EXTENDED FRONT CASTER BASE
• INTEGRATED FORK TUBES OPTIONAL
• OPEN & SOLID SIDES OPTIONS

• ALSO AVAILABLE IN FOUR BAY CONFIGURATIONS
• EACH BAY CONFORMS TO EIA 310-E STANDARD DIMENSIONS
• ACCEPTS ALL 3RD PARTY EIA 310-E EQUIPMENT & H&H ACCESSORIES
• VARIETY OF HEIGHTS & DEPTHS AVAILABLE
• SHOWN ON EXTENDED FRONT RECESSED CASTER BASE
• INTEGRATED FORK TUBES OPTIONAL
• OPEN & SOLID SIDE OPTIONS

• FULLY WELDED STEEL CONSTRUCTION
• BAYS INDIVIDUALLY CONFIGURABLE
• INTERFACE BETWEEN BAYS OPEN TO ALLOW FOR CROSS CONNECTIVITY
• SHOWN ON EXTENDED FRONT BASE
• INTEGRATED FORK TUBES OPTIONAL
• VARIETY OF WORK SURFACES STYLES AVAILABLE

• FULLY WELDED STEEL CONSTRUCTION
• BAY CONFORMS TO EIA 310-E STANDARD DIMENSIONS
• ACCEPTS ALL 3RD PARTY EIA 310-E EQUIPMENT & H&H ACCESSORIES
• VARIETY OF DESK OPTIONS
• VARIOUS CONFIGURATIONS AVAILABLE
• GANGABLE TO FORM MULTI-BAY CONSOLES

• HEAVY DUTY STEEL OR STAINLESS STEEL FORMED CONSTRUCTION
• FUNCTIONAL FLEXIBILITY
• VARIETY OF WIDTH AND DEPTH OPTIONS AVAILABLE
• CASTER/LEVELER READY OR FLOOR MOUNT

• INTEGRATED CASTER PROVISIONS REDUCES OVERALL CABINET HEIGHT
• LOWER CENTER OF GRAVITY
• ADDITIONAL BALLAST PROVISIONS
• SIDE ACCESS FORK TUBES, FLOOR LOCKS & LEVELERS OPTIONAL

• SECURE TO ANY FLOOR TYPE
• RETROFITTABLE TO DOLLY BASE OR WITH CASTERS
• IDEAL FOR DATA CENTERS & RAISED FLOOR APPLICATIONS

• INTEGRAL, RETRACTABLE ANTI-TIP PROVISIONS
• SPACE SAVING CONVENIENCE
• VARIOUS LEG LENGTHS AVAILABLE

• INTEGRAL CASTER/LEVELER PROVISIONS
• CASTERS INSTALLED IN EXTENDED FRONT ENHANCES STABILITY
• SIDE ACCESS FORK TUBES & FLOOR LOCKS OPTIONAL
• PROTECTIVE MATTING, NOSING & ESD MATTING OPTIONAL

• INTEGRAL CASTER/LEVELER PROVISIONS
• CASTERS INSTALLED IN EXTENDED FRONT ENHANCES STABILITY
• SIDE ACCESS FORK TUBES & FLOOR LOCKS OPTIONAL
• PROTECTIVE MATTING, NOSING & ESD MATTING OPTIONAL
• WIDEST BASE PLATFORM IN SINGLE BAY WELDED DESIGN

• REMOVABLE FROM FRAME
• SIDE ACCESS FORK TUBES, FLOOR LOCKS & LEVELERS OPTIONAL
• SHARP EDGES ELIMINATED WITH RADIUS & BALL CORNERS

• HEAVY DUTY STEEL OR STAINLESS STEEL FORMED CONSTRUCTION
• FUNCTIONAL FLEXIBILITY
• VARIETY OF WIDTH AND DEPTH OPTIONS AVAILABLE
• CASTER/LEVELER READY OR FLOOR MOUNT

• INTEGRATED CASTER PROVISIONS REDUCES OVERALL CABINET HEIGHT
• LOWER CENTER OF GRAVITY
• ADDITIONAL BALLAST PROVISIONS
• SIDE ACCESS FORK TUBES, FLOOR LOCKS & LEVELERS OPTIONAL

• SECURE TO ANY FLOOR TYPE
• RETROFITTABLE TO DOLLY BASE OR WITH CASTERS
• IDEAL FOR DATA CENTERS & RAISED FLOOR APPLICATIONS

• INTEGRAL, RETRACTABLE ANTI-TIP PROVISIONS
• SPACE SAVING CONVENIENCE
• VARIOUS LEG LENGTHS AVAILABLE

• INTEGRAL CASTER/LEVELER PROVISIONS
• CASTERS INSTALLED IN EXTENDED FRONT ENHANCES STABILITY
• SIDE ACCESS FORK TUBES & FLOOR LOCKS OPTIONAL
• PROTECTIVE MATTING, NOSING & ESD MATTING OPTIONAL

• INTEGRAL CASTER/LEVELER PROVISIONS
• CASTERS INSTALLED IN EXTENDED FRONT ENHANCES STABILITY
• SIDE ACCESS FORK TUBES & FLOOR LOCKS OPTIONAL
• PROTECTIVE MATTING, NOSING & ESD MATTING OPTIONAL
• WIDEST BASE PLATFORM IN SINGLE BAY WELDED DESIGN

• REMOVABLE FROM FRAME
• SIDE ACCESS FORK TUBES, FLOOR LOCKS & LEVELERS OPTIONAL
• SHARP EDGES ELIMINATED WITH RADIUS & BALL CORNERS

• STEEL OR STAINLESS STEEL FORMED CONSTRUCTION
• RANGE OF WIDTH AND DEPTH OPTIONS
• WIDE RANGE OF OPTIONS AVAILABLE
• FUNCTIONAL FLEXIBILITY

• REMOVABLE FOR EASY FIELD REPLACEMENT
• SOLID, LOUVERED OR PERFORATED AVAILABLE
• MULTIPLE FAN, CFM & LOCATION OPTIONS
• MULTIPLE CABLE EGRESS OPTIONS

• INCREASE  FAN INTAKE CLEARANCE  WHERE NEEDED
• FIELD RETROFITABLE
• IMPROVES HOT AIR REMOVAL
• MULTIPLE FAN VOLTAGE/CFM  OPTIONS

• SOLID TOP WITH RECESSED VENTED SIDES
• ALLOWS ACTIVE & PASSIVE EXHAUST
• INHIBITS INGRESS OF LIQUID & DEBRIS

• HIGH EFFICIENCY IMPELLER WITH ELECTRONIC SPEED CONTROL
• MINIMIZES CFM DEGRADATION WHERE STATIC PRESSURE EXITS
• IDEAL IN HEPA/CLEAN ROOM APPLICATIONS

• AVAILABLE AS SOLID OR WITH VARIOUS VENTING AND CABLE EGRESS CONFIGURATIONS
• PRACTICAL FOR  INDUSTRIAL  APPLICATIONS
• PROVIDES AN ADDITIONAL LEVEL OF SHIELDING IN SOME APPLICATIONS

• STEEL OR STAINLESS STEEL FORMED CONSTRUCTION
• RANGE OF WIDTH AND DEPTH OPTIONS
• WIDE RANGE OF OPTIONS AVAILABLE
• FUNCTIONAL FLEXIBILITY

• REMOVABLE FOR EASY FIELD REPLACEMENT
• SOLID, LOUVERED OR PERFORATED AVAILABLE
• MULTIPLE FAN, CFM & LOCATION OPTIONS
• MULTIPLE CABLE EGRESS OPTIONS

• INCREASE  FAN INTAKE CLEARANCE  WHERE NEEDED
• FIELD RETROFITABLE
• IMPROVES HOT AIR REMOVAL
• MULTIPLE FAN VOLTAGE/CFM  OPTIONS

• SOLID TOP WITH RECESSED VENTED SIDES
• ALLOWS ACTIVE & PASSIVE EXHAUST
• INHIBITS INGRESS OF LIQUID & DEBRIS

• HIGH EFFICIENCY IMPELLER WITH ELECTRONIC SPEED CONTROL
• MINIMIZES CFM DEGRADATION WHERE STATIC PRESSURE EXITS
• IDEAL IN HEPA/CLEAN ROOM APPLICATIONS

• AVAILABLE AS SOLID OR WITH VARIOUS VENTING AND CABLE EGRESS CONFIGURATIONS
• PRACTICAL FOR  INDUSTRIAL  APPLICATIONS
• PROVIDES AN ADDITIONAL LEVEL OF SHIELDING IN SOME APPLICATIONS

• STEEL OR STAINLESS FORMED CONSTRUCTION
• FUNCTIONAL FLEXIBILITY
• EXTENSIVE OPTIONS

• PANELS FLUSH WITH CABINET INCLUDING RECESSED HARDWARE 
• TWO PIECE CONSTRUCTION IN TALLER UNITS REDUCES WEIGHT
• DESIGN ALLOWS FOR QUICK REMOVAL FOR  ACCESS OR MAINTENANCE
• POCKET HANDLES MAKES HANDLING EASIER
• KEY LOCK AND TOOL-LESS LATCHES AVAILABLE

• SINGLE FORMED PANEL – SITS FLUSH TO CABINET SIDE
• MULTIPOINT ¼ TURNS WITH SLOTTED INSERT 
• VINYL COVERED CAMS PROTECT PAINT AND REDUCES VIBRATION
• AVAILABLE WITH CUTOUTS FOR CABLE EGRESS

• SINGLE PIECE FORMED PANEL COVERS ENTIRE CABINET SIDE
• NARROW PROFILE REDUCES OVERALL WIDTH
• HINGED  AVAILABLE AT THE CABINET FRONT OR  REAR – 
• TAMPER-PROOF HINGES AVAILABLE
• STANDARD AS SOLID WITH AVAILABLE  HANDLE OPTIONS
• INTERNAL LATCHING AVAILABLE FOR ADDED SECURITY

• SIDE IS INTEGRAL TO THE CABINET WELDMENT AND CABLE EGRESS CONFIGURATIONS
• POPULAR SOLUTION FOR ATE, INDUSTRIAL  NEMA APPLICATIONS
• COST EFFECTIVE SOLUTION WHEN ACCESS TO SIDES ARE NOT NEED
• PREFERRED BY SOME CLIENTS IN HIGH ATTENUATION EMI/RFI APPLICATIONS
• CAN BE FITTED TO A VARIETY OF AIR CONDITIONERS 
• PROVIDES AN ADDITIONAL LEVEL OF SHIELDING IN SOME APPLICATIONS
• PROVIDES A LEVEL OF SECURITY NOT OFFERED IN OTHER MANUFACTURES DESIGNS
•  SHOWN WITH OPTIONAL WALL TRACK AND CABLE EGRESS

• BOLT OR WELD ON EXTENDERS AVAILABLE
• PROVIDE ADDITION ROOM FOR CABLING AND COOLING
• FITS MOST OF H&H SIDE PANEL OPTIONS  SHOWN WITH HINGED SIDE
• FRONT AND REAR ACCESS PANELS AVAILABLE

• STEEL OR STAINLESS FORMED CONSTRUCTION
• FUNCTIONAL FLEXIBILITY
• EXTENSIVE OPTIONS

• PANELS FLUSH WITH CABINET INCLUDING RECESSED HARDWARE 
• TWO PIECE CONSTRUCTION IN TALLER UNITS REDUCES WEIGHT
• DESIGN ALLOWS FOR QUICK REMOVAL FOR  ACCESS OR MAINTENANCE
• POCKET HANDLES MAKES HANDLING EASIER
• KEY LOCK AND TOOL-LESS LATCHES AVAILABLE

• SINGLE FORMED PANEL – SITS FLUSH TO CABINET SIDE
• MULTIPOINT ¼ TURNS WITH SLOTTED INSERT 
• VINYL COVERED CAMS PROTECT PAINT AND REDUCES VIBRATION
• AVAILABLE WITH CUTOUTS FOR CABLE EGRESS

• SINGLE PIECE FORMED PANEL COVERS ENTIRE CABINET SIDE
• NARROW PROFILE REDUCES OVERALL WIDTH
• HINGED  AVAILABLE AT THE CABINET FRONT OR  REAR – 
• TAMPER-PROOF HINGES AVAILABLE
• STANDARD AS SOLID WITH AVAILABLE  HANDLE OPTIONS
• INTERNAL LATCHING AVAILABLE FOR ADDED SECURITY

• SIDE IS INTEGRAL TO THE CABINET WELDMENT AND CABLE EGRESS CONFIGURATIONS
• POPULAR SOLUTION FOR ATE, INDUSTRIAL  NEMA APPLICATIONS
• COST EFFECTIVE SOLUTION WHEN ACCESS TO SIDES ARE NOT NEED
• PREFERRED BY SOME CLIENTS IN HIGH ATTENUATION EMI/RFI APPLICATIONS
• CAN BE FITTED TO A VARIETY OF AIR CONDITIONERS 
• PROVIDES AN ADDITIONAL LEVEL OF SHIELDING IN SOME APPLICATIONS
• PROVIDES A LEVEL OF SECURITY NOT OFFERED IN OTHER MANUFACTURES DESIGNS
•  SHOWN WITH OPTIONAL WALL TRACK AND CABLE EGRESS

• BOLT OR WELD ON EXTENDERS AVAILABLE
• PROVIDE ADDITION ROOM FOR CABLING AND COOLING
• FITS MOST OF H&H SIDE PANEL OPTIONS  SHOWN WITH HINGED SIDE
• FRONT AND REAR ACCESS PANELS AVAILABLE

• FRONT & REAR DOORS ARE FORMED STEEL PANELS
• FLUSH OR FACE MOUNT – RIGHT OR LEFT HINGING
• HINGING  UP TO 180 DEGREE
• TAMPER-PROOF HINGING AVAILABLE
• AVAILABLE AS SOLID, PERFORATED, LOUVERED, VENTED OR WITH ACRYLIC OR POLYCARBONATE INSERTS

• FACE AND FLUSH MOUNT AVAILABLE
• AVAILABLE AS SOLID, LOUVERED, AND PERFORATED INSERTS
• FRONT  DOORS AVAILABLE WITH ACRYLIC OR POLYCARBONATE INSERTS
• PERFORATED HOT AISLE COLD AISLE CONFIGURATIONS AVAILABLE 
• FANS CAN BE ADDED TO DOORS AS NEEDED
• MOST STYLES REMOVABLE WITHOUT TOOLS

• AESTHETICALLY PLEASING ADDITION FOR ANY APPLICATION
• AVAILABLE WITH PERFORATED OR ACRYLIC INSERTS
• ADDITIONAL PERFORATING CAN BE ADDED TO BEVELED SECTIONS
• LIFTOFF HINGING WITH 150 DEGREES OF SWING

• DOOR HEIGHT LESS THAT THE FULL OPENING
• STANDARD EIA 310 MOUNTING PROVISIONS IN PANEL AREA
• I/O PANELS, PDU, AND OTHER DEVICES CAN BE INSTALLED
• SINGLE OR MULTIPLE PANELS CAN BE USED
• VARIOUS DOOR HEIGHTS AVAILABLE
• PANELS CAN BE INSTALLED ABOVE OR BELOW THE DOOR

• DOORS FOLD IN THE CENTER 
• GREAT SOLUTION WHEN AISLE SPACE IS LIMITED
• SINGLE AND MULTI POINT LATCHING OPTIONS 
• AVAILABLE AS SOLID, LOUVERED, OR WITH PERFORATED INSERT

• DOORS OPENS? IN THE CENTER
• GREAT SOLUTION WHEN AISLE SPACE IS LIMITED
• SHOWN ON OPTIONAL EXTENDER FRAME
• AVAILABLE AS SOLID, LOUVERED, OR WITH PERFORATED INSERT

• FAN AND FILTER IN ONE PACKAGE
• CONFIGURABLE TO MEET SPECIAL APPLICATIONS
• FILTER REMOVABLE AND WASHABLE

• MULTIPOINT LATCHING HELPS WITH GASKET COMPRESSION
• TWO, THREE, AND FOUR POINT LATCHING AVAILABLE
• DOUBLE LOUVERED PANEL AND RECESSED FAN HELPS PROTECT AGAINST OVERHEAD SPRINKLERS OR DRIPPING WATER
• OTHER SPECIAL APPLICATION DOORS AVAILABLE

• FRONT & REAR DOORS ARE FORMED STEEL PANELS
• FLUSH OR FACE MOUNT – RIGHT OR LEFT HINGING
• HINGING  UP TO 180 DEGREE
• TAMPER-PROOF HINGING AVAILABLE
• AVAILABLE AS SOLID, PERFORATED, LOUVERED, VENTED OR WITH ACRYLIC OR POLYCARBONATE INSERTS

• FACE AND FLUSH MOUNT AVAILABLE
• AVAILABLE AS SOLID, LOUVERED, AND PERFORATED INSERTS
• FRONT  DOORS AVAILABLE WITH ACRYLIC OR POLYCARBONATE INSERTS
• PERFORATED HOT AISLE COLD AISLE CONFIGURATIONS AVAILABLE 
• FANS CAN BE ADDED TO DOORS AS NEEDED
• MOST STYLES REMOVABLE WITHOUT TOOLS

• AESTHETICALLY PLEASING ADDITION FOR ANY APPLICATION
• AVAILABLE WITH PERFORATED OR ACRYLIC INSERTS
• ADDITIONAL PERFORATING CAN BE ADDED TO BEVELED SECTIONS
• LIFTOFF HINGING WITH 150 DEGREES OF SWING

• DOOR HEIGHT LESS THAT THE FULL OPENING
• STANDARD EIA 310 MOUNTING PROVISIONS IN PANEL AREA
• I/O PANELS, PDU, AND OTHER DEVICES CAN BE INSTALLED
• SINGLE OR MULTIPLE PANELS CAN BE USED
• VARIOUS DOOR HEIGHTS AVAILABLE
• PANELS CAN BE INSTALLED ABOVE OR BELOW THE DOOR

• DOORS FOLD IN THE CENTER 
• GREAT SOLUTION WHEN AISLE SPACE IS LIMITED
• SINGLE AND MULTI POINT LATCHING OPTIONS 
• AVAILABLE AS SOLID, LOUVERED, OR WITH PERFORATED INSERT

• DOORS OPENS? IN THE CENTER
• GREAT SOLUTION WHEN AISLE SPACE IS LIMITED
• SHOWN ON OPTIONAL EXTENDER FRAME
• AVAILABLE AS SOLID, LOUVERED, OR WITH PERFORATED INSERT

• FAN AND FILTER IN ONE PACKAGE
• CONFIGURABLE TO MEET SPECIAL APPLICATIONS
• FILTER REMOVABLE AND WASHABLE

• MULTIPOINT LATCHING HELPS WITH GASKET COMPRESSION
• TWO, THREE, AND FOUR POINT LATCHING AVAILABLE
• DOUBLE LOUVERED PANEL AND RECESSED FAN HELPS PROTECT AGAINST OVERHEAD SPRINKLERS OR DRIPPING WATER
• OTHER SPECIAL APPLICATION DOORS AVAILABLE

Examples of the Accessory options available for use across all H&H enclosure/cabinet types

• Meets EIA 310-E standard equipment mounting specs and accepts all H&H and OEM accessories
• Tapped, Universal Square Hole or Round through Hole mounting options.
• L shaped or Combination with dual mounting surfaces.
• Vertical strut for side mounting chassis supports and other accessories.
• Specialty mounting solutions available.

• Standard fixed four point mounting
• Two point cantilever mounting
• Adjustable rear mounting
• Pull out slide mounted
• Solid, Vented including ESD surfaces options
• Heavy duty variations available
• Storage drawers, with and without lids
• Chassis Guides for additional support in a variety of lengths

• Swivel, rigid and locking casters, wheels from 2” to 6” diameter
• Standard Weight capacities from 200lbs to 1200lbs, Rack casters available up to 5200 lbs.
• Steady cabinets with Caster brakes or Floor Locks.
• Levelers, retractable anti-tip legs and extended bases provide support and stability.

• Vertical and horizontal power distribution options starting at 15A NEMA and 10A IEC
• Racks support “smart” PDU installation
• Hardwired receptacle and junction box integration as needed
• Grounding choices include:
  • Solid Copper bus bars
  • Grounding studs
  • Ground Cables and Harnesses
  • Banana Jacks
  • ESD static control laminate and mats
  • Isolated ground options available.
• Additional Options
  • INTERNAL CABINET LIGHTING SYSTEMS
  • EXTERNAL ALERT LIGHTS
  • MAIN POWER SHUT OFF OPTIONS

• Organize and support data, fiber optic, and electrical cables
• Vertical and horizontal routing as needed
• Available articulating cable arms and rack mounted cable booms
• Grommet cable pass thru panel options for bases, sides, tops, and doors
• I/O, brush panels, gland plates available for cable egress and airflow management

• Axial fans and on board fan trays move ambient air
• Package blowers and impeller based assemblies to pressurize or exhaust
• Rack mount, base mount, door and cabinet washable filter options
• Brushes and baffles available to help restrict air flow control as needed
• Air conditioning and heat exchange systems for standalone applications
• Thermal and Acoustical foam can be added to most enclosures
• Thermostats, Speed control and temperature monitoring options available

• Front mount desks available for all single and multi-bay configurations
• Foldable desk options for front and side of bay
• Pull out writing surfaces with lock in/lock out feature
• Monitors, Keyboards & other Peripherals external mounting options
• Painted steel and laminate options available, including ESD options

Examples of the Accessory options available for use across all H&H enclosure/cabinet types

• Meets EIA 310-E standard equipment mounting specs and accepts all H&H and OEM accessories
• Tapped, Universal Square Hole or Round through Hole mounting options.
• L shaped or Combination with dual mounting surfaces.
• Vertical strut for side mounting chassis supports and other accessories.
• Specialty mounting solutions available.

• Standard fixed four point mounting
• Two point cantilever mounting
• Adjustable rear mounting
• Pull out slide mounted
• Solid, Vented including ESD surfaces options
• Heavy duty variations available
• Storage drawers, with and without lids
• Chassis Guides for additional support in a variety of lengths

• Swivel, rigid and locking casters, wheels from 2” to 6” diameter
• Standard Weight capacities from 200lbs to 1200lbs, Rack casters available up to 5200 lbs.
• Steady cabinets with Caster brakes or Floor Locks.
• Levelers, retractable anti-tip legs and extended bases provide support and stability.

• Vertical and horizontal power distribution options starting at 15A NEMA and 10A IEC
• Racks support “smart” PDU installation
• Hardwired receptacle and junction box integration as needed
• Grounding choices include:
  • Solid Copper bus bars
  • Grounding studs
  • Ground Cables and Harnesses
  • Banana Jacks
  • ESD static control laminate and mats
  • Isolated ground options available.
• Additional Options
  • INTERNAL CABINET LIGHTING SYSTEMS
  • EXTERNAL ALERT LIGHTS
  • MAIN POWER SHUT OFF OPTIONS

• Organize and support data, fiber optic, and electrical cables
• Vertical and horizontal routing as needed
• Available articulating cable arms and rack mounted cable booms
• Grommet cable pass thru panel options for bases, sides, tops, and doors
• I/O, brush panels, gland plates available for cable egress and airflow management

• Axial fans and on board fan trays move ambient air
• Package blowers and impeller based assemblies to pressurize or exhaust
• Rack mount, base mount, door and cabinet washable filter options
• Brushes and baffles available to help restrict air flow control as needed
• Air conditioning and heat exchange systems for standalone applications
• Thermal and Acoustical foam can be added to most enclosures
• Thermostats, Speed control and temperature monitoring options available

• Front mount desks available for all single and multi-bay configurations
• Foldable desk options for front and side of bay
• Pull out writing surfaces with lock in/lock out feature
• Monitors, Keyboards & other Peripherals external mounting options
• Painted steel and laminate options available, including ESD options